I Would Like To Save Energy With LED, But …

But LEDs do not replace light bulbs at all!

However, the new LEDs can replace light bulbs one by one. However, LEDs have more than one equivalent to the old light bulb. This is due to the technical possibilities. With LEDs, many technical subtleties are variable, such as the light color, the color temperature, the angle of radiation or the wattage. This has the effect, on the one hand, that there is more choice on the other, but it is also more difficult to look through the supply jungle.

How Can It Be That You Can Replace A 60 Watt Light Bulb With A 9 Watt As Well As A 12 Watt LED?

This is due to the fact that the light intensity is no longer equal to the number of Watts. With LEDs the Watts number is not the only property that allows conclusions about the brightness, but also the light brightness and the light color are just as important. The number of watts is basically only how much electricity is consumed, but indirectly, the wat number also makes it possible to close the brightness. Thus, 60 watt light bulbs are replaced by LEDs with 9 to 12 watt. If you want to know exactly how bright the new LED is, you should pay attention to the value of light brightness, indicated in lumens. Last but not least, light color also plays a role.LEDs are available in the light colors warm white and daylight. Whereby warmwhite is the equivalent of the light bulb color.

A detailed guide on how to find the right LED as a replacement for your light bulb is available at mysteryaround.

But Is Not It That Leds Make Bad Light And It Takes Very Long To Tackle Them?

LEDs make the same light as light bulbs, but they also have the possibility to choose other light properties. As already explained above, these depend mainly on the light intensity (lumen) and the light color (Kelvin). If you want exactly the old light bulb light, you should have to rely on the light color warm white (2700 Kelvin) and a brightness of 700 to 800 lumen. The LED only with time delay approach, is a rumor which persists stubborn. LEDs “go immediately”, just like light bulbs. LEDs are often confused with mercury-based energy-saving lamps. These actually start with a slight delay.

That Is, Leds Are Not Energy Saving Lamps At All?

In language usage, the term energy saving lamp is used for two different things. On the one hand, the term energy saving lamp designates energy-saving lamps in general, and on the other hand, the term energy saving lamp for compact fluorescent lamps is also used more frequently.

I Have Times Heard That Leds Are Not Good For The Environment And Contain Mercury.

LEDs do not contain mercury, so no pollutants are released when the lamp breaks. However, LEDs contain rare earths, which must be obtained elaborately. For this reason, they must also be disposed of separately. At the very least, LEDs from all light sources have the best ecological balance ( Stiftung Warentest 2013). This is mainly due to the long life span of about 15 to 20 years and very low power consumption.Halogen lamps, for example, which break down significantly faster and have a high current consumption, are the worst in terms of life cycle assessment.

Well, But I Would Like To Continue To Dimm My Lamps!

LEDs are now also dimmable. However, not every model. If you want a dimmable LED, you should pay attention when buying a dimmable model.